Rotary table shot blasting machine
February 14, 2019
Preservation line
February 14, 2019

Wire mesh belt shot blasting machine is suitable for continuous blasting thin and collision-sensitive die castings, pressure castings, ferrous and non-ferrous castings, forgings, automotive accessories, and weldments. Workpiece weight ranging from 1kg to 100kg.
A highly wear-resistant wire mesh belt, with tension adjustment, provides the part transport. Wire mesh belt width has 600mm, 800mm, 1000mm and 1200mm.
Due to the wire mesh belt, the workpieces can be blasted both from upper and bottom. Normally the machine has 4 blast wheel, 6 blast wheels or 8 blast wheels.
Wire mesh belt shot blasting machine chamber is protected by wear-resistant manganese steel liners.
High quality cartridge type dust collector is used to keep the environmental protection, which makes sure the dust emission lower than 30mg/m3.
The machine opening size, quantity and power of blasting wheels, width and length of wire mesh conveyor are confirmed according to the productivity requirements and work piece specifics.
If a standard model does not meet your surface preparation requirement, we will develop a tailor-made blast machine design for you.
  1. The wire mesh belt shot blasting machine is compact design and it doesn’t need a pit.
  2. Use highly wear-resistant wire mesh belt, which has long life time.
  3. Wire mesh conveyor speed adjustable from 5m/min to 2m/min.
  4. Touch screen operator interface and integrated PLC, automatic mode or manual mode;
  5. The blasting chamber is protected by wear-resistant manganese steel liner, lifetime is about 15000 hours.
  6. Series of rubber screens keep the abrasive inside the blasting machine.
  7. Continuous flow makes this machine can connect with the production line.

Machine typeQW600QW800QW1000QW1000-XQW1250QW1250-X
Machine Openingdimensions ø x b (mm)600x400800x5001000x5001000x5001250x6001250x600
Number of wheels444848
Wheel motor power (kW)7.51115111511
Total installed power (kW)37537110173103